SHOP BY VEHICLE       MADE IN THE U.S.A.      1-256-442-0607
0 Items     Subtotal: $0.00    


Rusty's Front Driveshaft Conversion - WJ & ZJ

RD-DS01-UV
$350.00

Availability: In stock

Quick Overview

Rusty's Front Driveshaft Conversion - WJ & ZJ

* Required Fields

$350.00

Details

Whether you are lifting your WJ or ZJ Grand Cherokee or simply trying to eliminate driveline noises and vibrations on a stock Grand Cherokee, Rusty's Driveshaft Conversion is the solution! This kit converts the front driveshaft to a conventional Constant Velocity (CV) joint at the transfer case and a traditional U-joint at the axle. The kit includes a new driveshaft assembly, a yoke for the axle, U-joint straps, and bolts. Note that you will need to verify which style of driveshaft the vehicle has as well as measure the length of the driveshaft (information below). Again, this conversion works with both stock and lifted applications!

The WJ and ZJ Grand Cherokee comes with several different styles of driveshafts. Some come with a standard CV (constant velocity) joint at the transfer case and a U-joint at the axle; this is good and if this is what your Jeep has because you don’t have to change anything. Others come with a CV at the transfer case and a Rezeppa type joint at the axle (see pictures above). If the front driveshaft is this style and you are lifting it, this conversion is exactly what you need! There are also some WJs and ZJs with a Rezeppa at both ends of the driveshaft; if your vehicle has this style you will need to buy the Rusty’s Driveshaft Conversion as well as the optional transfer case yoke for an additional $89.

Please Note:
Measuring the length of the front driveshaft is required. This must be done after the suspension installation is completed and with the full weight of the vehicle on the suspension. See diagram for how measurements should be taken. Again, if the original shaft has Rezeppa-style joints on both ends, a yoke for the transfer case is required at an additional price of $89.

MEASUREMENT INSTRUCTIONS:
Under the vehicle, take a measurement from the yoke coming from your Transfer Case to the yoke on your axle. See the illustration above. Call us with the measurement and we will send out your new driveshaft ASAP.

Make sure to take the measurement with the vehicle weight on the suspension.

Kit Includes:
• DriveShaft
• U-Joints
• U-Joint Straps
• Yoke