Rusty’s is well known for bringing affordable race technology to Jeep enthusiasts! Rusty’s RX300 line of Remote Reservoir Shock Absorbers does just that with applications available for several popular Jeep models. The RX300 shocks go way beyond the traditional shock absorber when it comes to smoothing out rugged terrain.
Rusty’s RX300 Shock Absorbers feature a 14mm chrome-hardened piston shaft for superior rigidity and minimal seal wear. The shock body itself is constructed of 2” diameter seamless DOM tubing for excellent heat-transfer and is capped with high-quality machined billet ends that capture polyurethane bushings. Inside, the massive 1-3/4" diameter piston has progressive valving that is tuned to provide a smooth ride on the road but has the ability to quickly step up the dampening and effectively smooth out the bumps when the going gets rough off the pavement.
The 10” remote reservoir substantially increases the oil capacity of the shock, which helps prevent shock fade during those extended high-speed romps on desert roads. A high-pressure nitrogen charge helps further resist shock fade. The remote reservoir is attached to the main shock body via a braided stainless steel hose and is secured using polyurethane isolators and stainless steel clamps.
Race technology typically has a big price tag, but Rusty’s RX300 shock absorbers are also exceptional value when compared to other remote reservoir shocks on the market. Unlike most other brands, however, the RX300 shocks are Made in the USA and Trail Tested Tough!
APPLICATIONS / SPECS
|VEHICLE||AMOUNT OF LIFT||COLLAPSED LENGTH||EXTENDED LENGTH|
|XJ Cherokee ('84-'01)||8" Rear||20"||34.2"|
PLEASE NOTE: Actual lift height will vary from manufacturer to manufacturer and will also depend on vehicle curb weight, the age of the vehicle's springs, and many other factors. The lift heights listed in the chart should be used as a guideline only. We highly recommend taking measurements of your vehicle's existing shocks and comparing them to the extended and collapsed lengths provided to be sure you are purchasing the correct shock lengths for your vehicle.
• Made in the USA
• Billet End Caps
• 2 inch DOM Seamless Tubing Construction
• 10 inch Reservoir w/ SS hose
• 14mm shaft
• 1 ¾ Aluminum Piston
• 2 Year Warranty
All of the RX300 shocks have EB-1 style loop bushings at both ends, if you are replacing a stud style shock you will need part number RX-SC50.