Tom Woods NP242 SYE & Tom Wood 1310 Series CV Driveshaft
Get a Tom Woods Slip Yoke Eliminator Kit along with a Tom Woods CV Driveshaft for one low price! This is for the NP242 transfer case ONLY.
Rusty’s Off Road does everything to send the correct driveshaft for your vehicle. We use our 30 plus years of knowledge and the knowledge of Tom Woods Driveline to send you what we think is the correct driveline. Also note that these driveshafts come with a 1310 U-joint at all locations.
Any driveshaft over the length of 36 inches must be made of larger tubing and there is an up charge of $70.00.
Rusty’s Off Road Products makes every effort to ensure product compatibility with all vehicles listed but due to unknown auto manufacturer changes and inconsistencies by the auto manufacturers, Rusty’s cannot be responsible for 100% compatibility.
With this said, we suggest that to make sure you get the correct driveline, order the AA Combo and we will send the SYE kit, once it is installed, measure for the driveline with the vehicle at ride height, measure from yoke to yoke and give our order desk a call, inform us of the measurements and we will send the correct driveline.
If you decide that you must get the driveline as quick as possible with the SYE, Rusty’s Off Road will do everything possible to get you the correct driveline, If for some reason we get it wrong, we will be glad to swap it out. Rusty’s will not be responsible for shipping in swapping the driveline in either direction.
MEASUREMENT INSTRUCTIONS :
Under the vehicle, take measurement from the yoke coming from your Transfer Case to the yoke on your Axle. Call us with measurement and we will send out your new driveshaft ASAP, which is usually 3 business days and allow 5 to 7 days for shipping depending on your location.
**Make sure to take the measurement with the vehicle weight on the suspension.
DRIVESHAFT MEASUREMENT GUIDE: