Rusty's HD Front Track Bar Frame Mount (XJ,ZJ)


  • Brand: Rusty's Off Road Products
  • Availability: In Stock
  • Part Number: RC-TB160-UV

This is the same HD frame mount that come with our RC-TB200-UV track bar kit that eliminates the problematic tie rod end style mount at the frame. This conversion eliminates the tie rod end at the frame, which tends to wear out more quickly than conventional bushings, especially with taller lifts and hard use. Just remove the 4 bolts that attach the factory frame mount to the frame, inspect all hardware, install the Rusty’s Frame Mount, torque the hardware, and re-install the track bar. You can also add Rusty’s RS-FRB1-XJ to make the assembly even stronger.

Please note that you will need a track bar with conventional bushings to use this mount rather than the stock or aftermarket tie-rod style of joint. If you don't have that, then RC-TB150-UV may be a better choice.

Important Fitment Information:

Be sure to measure the amount of exposed threads of your adjustable track bar. If there is more than 1.25" of threads exposed you will need to purchase a longer track bar. This is very important and will insure the proper thread contact. Please measure and verify before ordering.

Recently Viewed Products