The system starts with your choice of radius-arm, 4 link, 3 link, or competition 4 link long travel system to customize the kit to match your desired use! (Need help to determine the best setup for your use? Click here to see our XJ Long Travel Control Arm Options Guide) Each choice will include our adjustable forged flex joints on both the lower and upper control arms that are rebuildable on the radius arm, 4 link and 3 link options to provide maximum articulation. The competition 4 link will use an adjustable 1-1/4" heim joints to better serve a competition built vehicle. The arms all utilize Clevite factory rubber control arm bushings at the axle end to ensure that no noise or vibrations are transmitted through the unibody. The arms are constructed of 2" and 1-1/2" diameter D.O.M. tubing, so go ahead and bash them against rocks and ledges because they can take the abuse and keep right on going!
Rusty's used over 40 years of knowledge and the technology of 3-D computer modeling to design a suspension system that would retain a good ride, offer great articulation, and most importantly, would hold up to the most severe off roading imaginable. Many other companies have products that weld on or have an un proven design. Make sure you don't accept anything less; Buy Rusty's.
This system delivers the articulation that keeps your tires on the ground, even over the most radical terrain.
The Rusty's 8" long-travel suspension is a complete package; we didn't cut any corners. Rusty's high quality 8.5 coils springs are used in the front, while complete 6.5 leaf spring packs, grade 8 U-bolts, and heavy duty boomerang extended shackles are used in the rear. NO LIFT BLOCKS! Rusty's heavy-duty track bar, frame mount, and frame brace keeps the body centered and adds significant strength to the unibody. Rusty's 3 inch drop pitman arm is included to keep the steering straight and to keep the tie rod ends from binding during extreme flex. The Rusty's Kevlar stainless steel brake lines offer better brake performance and give the extra length needed for long-travel suspension systems. Rusty's own sway bar disconnects are used for maximum flex off road and can be re-attached in just seconds for great on-road handling. Rusty's Hydro shocks offer great handling on the street and an emphasis on off-road performance. Rusty's mono tube shocks are available.
NOTE: When raising the Cherokee 6 inches or more, Rusty's highly recommends the use of an Advance Adapter's SYE (Slip Yoke Eliminator) to prevent driveline vibrations. This is available for the NP231 & NP242 transfer case. We also offer a Combo Kit that includes a quality CV driveshaft built by Tom Woods Driveline.
Due to the thinness of the Jeep unibody, we've designed our long-arm kits to be completely bolt-on. Although it is possible to weld to the unibody, the longevity of the weld in questionable. The unibody is only 16 guage (.060 in.) and the heat of a weld stresses the thin metal. The weld may not crack, but the unibody around it may. The unibody was welded from the factory, however, it was done with robotically-controlled equipment complete with heat sensors that resulted in welds which are much more exact than even the most skilled human welder. Our bolt-on systems are not only more durable but they are also much easier to install. The Rusty's reinforcement brackets creates a larger surface area that distributes stresses over a larger area than a weld-on installation. In addition, we use adjustable control arms that not only allow easy caster adjustment but also incorporate pivot points designed for suspension flex, which further eliminates stress on the unibody mounts. With Rusty's having over 40 years in business, engineers and design specialist and complete in house manufacturing you can expect the quality and craftsmanship you demand for your Jeep.
CLICK HERE to see this product installed and tested on Trucks!, Xtreme 4x4 or Gearz TV!
NOTE: When lifting the XJ Cherokee 6 inches or more, Rusty's highly recommends the use of a Slip Yoke Eliminator Kit to prevent driveline vibrations. This is available for only the NP231 and NP242 transfer cases. We also offer a Combo Kit that includes a quality CV driveshaft built by Tom Woods Driveline.
NOTE: 2000-2001 Jeep XJ Cherokee models require the use of Part# 52001180 Transmission Mount to be installed with this suspension system.
PLEASE NOTE: THIS SUSPENSION KIT IS NOT COMPATIBLE WITH VEHICLES EQUIPPED WITH THE PEUGEOT MANUAL TRANSMISSION.
Click to download installation instructions
Related Products
Order online and have your products delivered to your closest store for free
THIS SYSTEM IS NOT A BOLT-ON STEERING SYSTEM AND INSTALLATION REQUIRES PROFESSIONAL MECHANICAL AND FABRICATION SKILLS. WELDING AND GRINDING IS REQUIRED.With Jeeps getting larger, tires getting bigger, and rocks...
1st Place Proven in the 2024 Baja 500 The Rusty’s JT Gladiator Rear 4 Link Conversion Kit is engineered to elevate your off-road adventures with unmatched performance and durability. Designed...
THIS SYSTEM IS NOT A BOLT-ON STEERING SYSTEM AND INSTALLATION REQUIRES PROFESSIONAL MECHANICAL AND FABRICATION SKILLS. WELDING AND GRINDING IS REQUIRED.With Jeeps getting larger, tires getting bigger, and rocks...
Rusty's crawler high clearance fender flares are the direct result of customer requests for better, more unique body armor for the XJ Cherokee, and we delivered! Rusty's new XJ Extreme-Clearance...
Rusty's crawler high clearance fender flares are the direct result of customer requests for better, more unique body armor for the XJ Cherokee, and we delivered! Rusty's new XJ Extreme-Clearance...
Rusty's crawler high clearance fender flares are the direct result of customer requests for better, more unique body armor for the XJ Cherokee, and we delivered! Rusty's new XJ Extreme-Clearance...
These brake lines fit '76-'86 CJ models. When ordering please list vehicle year and model so we can match the correct lines to the vehicle.Includes front and rear brake lines.Rusty's...
Rusty's raised Track Bar Mount for the JL Wrangler and JT Gladiator is designed for use with a drag link flip steering system. The bracket works with factory Dana 30...
Rusty’s 2" Advanced Kit for the JT Gladiator was specifically developed to deliver the on-road performance people expect from the JT combined with the ultimate flex and control off...
Rusty’s 4" Advanced Kit for the JT Gladiator was specifically developed to deliver the on-road performance people expect from the JT combined with the ultimate flex and control off...
The RockJock High Steer Knuckles for all JL Wrangler and JT Gladiator models are a game changer! Simply installing these knuckles raises your tie rod 2 3/4 in. and your drag link 2 1/2...
The Rusty’s JT Gladiator Rear 4 Link Upgrade Kit is engineered to elevate your off-road adventures with unmatched performance and durability. Designed with precision and strength in mind, this kit...
Priced Individually.High Misalignment Series SpacersStandard rod end spacers should only be used when the width of the ball is too narrow for an application. If more misalignment is required, high...